Food-contact compliance: the declaration your buyer asks for is the reason a container gets rejected at the port

The container lands in Rotterdam and the buyer asks for the Declaration of Compliance. Purchasing searches every email and finds one line from the supplier: the material is food grade. Three days later the goods sit in a bonded warehouse billed by the day, and reworking them means 120,000 pouches going back on the press. This is not a compliance department failure. It is a question nobody asked when the order was placed: what exactly has to be written on that sheet of paper.

The EU framework is Regulation (EC) No 1935/2004; for plastics the detail sits in (EU) No 10/2011, where overall migration is capped at 10 mg/dm2 or 60 mg/kg, individual substances carry their own specific migration limits, and good manufacturing practice is governed by (EC) No 2023/2006. Annex IV of 10/2011 lists what the declaration must state: material identity, test conditions (simulant, time, temperature), and the limit each result is checked against. Leave out one item and the document is worth nothing to the buyer.

Three takeaways
1. Settle three things before you order: what food it touches, at what fill or sterilisation temperature, and for how long. Those three answers decide the simulant and the test conditions. Without them, no declaration can be written.
2. The declaration has to trace to a batch. Material grade, supplier and migration report number must line up, or the audit trail breaks at the first check.
3. Keep the printed surface off the food. Use low-migration inks and varnishes and put a barrier between the print and the product, otherwise overall migration is hard to hold under the limit.

What buyers in each market actually weigh

The mistake here is treating material safety as if it were document completeness. Material safety is a laboratory result. Document completeness is what your buyer hands to customs. Both have to be done.

MarketRegulatory requirementAesthetic preferenceHow they buy
EU (DE, FR, NL)Framework (EC) 1935/2004 plus (EU) 10/2011 for plastics; declaration supplied per batch; overall migration 10 mg/dm2; inks checked against the Swiss printing ink ordinanceRestrained, high information density, compliance notes in small print on the backDeclaration and migration report first, no production slot without them; everything in writing, verbal promises do not count
North America (US, CA)FDA 21 CFR 176.170 for paper and board contacting aqueous and fatty food, 176.180 for dry food; every component must be a permitted substanceLarge colour blocks, shelf-ready, generous space for barcode and nutrition panelBuyers ask for a food contact letter and confirm line by line in a checklist
ChinaGB 4806.1 general safety, with GB 4806.7 for plastics or GB 4806.8 for paper and board; overall migration tested to GB 31604.8Image and text weighted equally, gift boxes judged by hand feel and the sound of the lidOriginal test reports and supplier qualification, mostly over WeChat, expect fast replies
Japan and KoreaJapan's positive list under the Food Sanitation Act, synthetic resin raw materials must be listed; Korea MFDS standards for utensils, containers and packaging require elution testingMinimal, small type, crisp printing, clean edgesTwo to three sample rounds, documents must match the physical sample exactly

A buyer says nothing has changed, then switches the fill from dry powder to a sauce. Fatty food needs a different simulant, the condition moves from 10 days at 40C to 2 hours at 70C, and the existing report is void. Change the product, the fill temperature or the destination market and the test matrix has to be reviewed again.

What the benchmarks do — and what you can copy

How Tetra Pak documents packaging compliance in public material

Its technical literature splits a pack into contact layer, barrier layer and print layer, gives each layer its own compliance basis, then assembles a single declaration for the whole pack. What you can copy is that layered structure: an auditor checks documents layer by layer, which is far easier than defending one sweeping statement. What you cannot copy is the data volume behind it. The same structure has long-run migration data across several markets; a mid-sized order cannot fund that, so you run one set of standard conditions and keep it on file by batch.

McDonald's published specification for paper-based packaging suppliers

It puts traceable fibre sourcing under FSC chain of custody and restrictions on contact-side inks into one supplier standard, side by side. What you can copy is treating ink as its own line item instead of hiding it behind a general food-grade claim. What you cannot copy is the global audit team; a smaller supplier substitutes third-party reports for an on-site audit.

What we actually deliver (FABE)

Export documents complete in-house

Material grade, supplier statement and the migration test request are filed together in the plant and released with the same batch number. The benefit is that your customs broker stops asking the same question three times. The evidence is an export documentation routine running since the plant was built in 1996, released in one package.

Water-based ink, printed surface kept off the food

Low-migration water-based inks with a barrier structure over the print so ink never touches the product. Overall migration is easier to hold inside 10 mg/dm2. The evidence is that the water-based ink line runs in the Chengyang plant and is not outsourced.

Six-language team in-house, documents and goods tell one story

A German buyer wants the declaration in German, a Japanese buyer wants Japanese notes; both are produced in-house instead of bouncing through a translation agency. The benefit is that report numbers, material names and limits cannot drift apart. The evidence is the six-language team working between the 500 sqm design office and the 2,000 sqm plant.

Send me the spec sheet you use today. Four lines are enough: product, fill temperature, sterilisation method, destination market. Within 48 hours you get a list of which migration tests apply, which simulants to use, and which fields the declaration must carry.

Hotel service standards, moved into a factory

A hotel does not make the guest hunt for the room, and packaging should not make the buyer hunt for documents.

What a hotel doesWhat we commit to
Someone answers the front desk around the clockFirst reply within 24 hours, same-day answer on working days
Returning guests have a preference file, nothing repeatedOne controlled spec sheet per SKU, a revision changes in one place
Express check-out, one clean billAQL inspection report and export documents released together

FAQ and service promise

Can we write the declaration ourselves?
You can, but you own its content. A declaration rests on which tests were run and which limit was applied. Without a report number behind it, an auditor asks for the missing piece and you start over.
How long do migration tests take?
Seven to ten working days per set of conditions, three to five days expedited. Run several simulants together and the lead time follows the longest one, not the sum.
What is the minimum order?
300 kg for rollstock, 30,000 pieces for premade bags. Sampling is not bound by the minimum and is billed on material actually used.
How are samples and tooling charged?
Sampling is billed at cost of material used. Cutting dies and print cylinders are a one-time investment, not charged again on repeat orders, and the tooling belongs to you.
What happens if something goes wrong?
We hold the retention sample from the same batch, then give a direction on cause within 48 hours: material, process or test condition. If the fault is ours, we remake and carry the testing cost.
Do we need to retest if the product changes?
Yes. Dry powder to a fatty sauce moves the simulant from 10 percent ethanol to vegetable oil, and the condition from long-term to short-term at high temperature. The old report no longer applies.
Talk to Tian Jie directly · reply same day
WeChat tianjie567 (mention “packaging” for a faster reply)
Mobile / WeChat +86 155 8981 0168 (Tian Jie)
Tel +86 532 8577 9539
Hotline (China) 400-8558-816
Email sd532@126.com
Address No.7 Xianshan Road, Chengyang District, Qingdao, China (2,000㎡ plant + 500㎡ design office)
Hours Mon–Sat 8:30–17:30 (GMT+8) · urgent orders 24/7
Two steps. First, send product, fill temperature and destination market to WeChat tianjie567. Second, within 48 hours you get the test list plus a compliance document template, with sampling scheduled in parallel.

Regulatory references above follow the published texts. Confirm applicability item by item against your product, contact conditions and destination market.