Same batch, two colours: the gap between Delta E 2 and Delta E 5 decides whether you reprint

A retailer put two months of deliveries side by side on the shelf, found two different colours on the same SKU, and rejected the whole batch with four words: the colour is off. Two causes surfaced. The ink batch had changed without a new signed sample, and the contract said only that colour follows the sample, with no tolerance and no measurement condition.

The usual convention in flexible packaging is Delta E 2000 within 2 for a single batch and within 3 between batches, measured under D65 at 45/0 geometry and judged against the customer's signed sample. Corrugated flexo typically shows 18 to 25 percent dot gain while offset sits at 12 to 18 percent, so one colour reference cannot look the same across processes. Spot colour and four-colour build differ by an order of magnitude in stability.

Three takeaways
1. Fix three things in the contract: the colour reference as a Pantone number or CMYK value, the Delta E limit with its measurement condition, and which signed sample governs. Colour follows the sample on its own means no standard at all.
2. Hold a single batch within Delta E 2 and batch to batch within 3. Full-bleed darks and skin tones are the hardest, so those panels deserve spot colour or an inline inspection step.
3. A new ink batch, a new substrate supplier or a different press each require a new signed sample. Keep three: customer, factory and a third party, so a dispute has a shared reference.

What buyers in each market actually weigh

Colour difference is not a matter of taste, it is a matter of measurement. Agree what is measured, who judges, and what happens when it fails, before arguing about whether the colour looks right. Without those three, the conversation only gets louder.

MarketRegulatory hard requirementsAesthetic preferenceCommercial and communication habits
EU (DE, FR, NL)Brand colour is treated as an asset, Pantone spot colour with a Delta E report is expected, and some retailers ask for shelf comparison photosRestrained, low saturation, large areas of one colour, with very little toleranceComplete documents, slow process; colour card and measurement report first, price second
North America (US, CA)Retail own-brand programmes are extremely sensitive to colour shift and often ask for G7 or GRACoL print reportsLarge colour blocks, high saturation, advertising-grade visualsNumbers decide; deliver everything at once instead of in three instalments
Middle East (SA, AE)Gold and silver spot colours with hot-stamp overprint are common, and approval is often given on siteGold, weight, strong decorationRelationship first; signed approval in person rather than from a photograph
Japan and KoreaVery pale and low-saturation palettes are popular, Delta E 1.5 requests are common, and per-batch colour data must ship with the goodsMinimal, delicate, light tonesSeveral approval rounds, tolerances to the decimal, and document formats that must match

The same red is an asset in Europe, a shelf weapon in North America, a courtesy in the Gulf and a matter of restraint in Japan and Korea. Without a written measurement condition, four readings collide on one batch.

What the benchmarks do — and what you can copy

Coca-Cola's spot red management

In its published brand rules the signature red is managed as a fixed spot colour, and the global supply chain reproduces it with spot ink rather than a four-colour build. What you can copy is the decision: brand colour in spot, four-colour only for supporting graphics, and half the colour variation disappears at the source. What you cannot copy is the volume, because spot ink carries a minimum order and small runs pay a clear premium.

The G7 method and press makers' published calibration

Idealliance's G7 method and the press makers' public material both calibrate grey balance and dot-gain curves to a target so different machines print the same numbers. Copy the thinking: replace looks about right with a measurable curve and a Delta E limit. What you cannot copy is the certification cost, since certification and annual re-checks are a fixed expense that small plants usually carry only on key accounts.

What we actually deliver (FABE)

In-house colour management

Feature: built in 1996, with labels and flexible packaging completed in the same plant. Advantage: a D65 viewing cabinet and a spectrophotometer sit in-house, and measured Delta E travels with the goods. Benefit: the buyer does not have to measure anything on arrival, because the report drops straight into their acceptance workflow. Evidence: pre-press through pouch making runs on one line in Chengyang, Qingdao, so a colour problem can be reproduced on the retained sample of the same batch.

Batch control on water-based ink

Feature: a water-based ink system with batch records retained. Advantage: the same colour reference keeps the same ink maker and formula, and every batch change triggers a drawdown check. Benefit: nobody argues that last month's batch looked better. Evidence: 2,000 square metres of production in Shibei and a 500 square metre design office in Shinan, with sampling and mass production on the same colour parameters.

Colour reference written into multilingual specs

Feature: six language teams on staff. Advantage: the Pantone number, the Delta E tolerance and the measurement condition appear in five languages in one spec sheet. Benefit: the customer's internal handover does not drift and the acceptance standard stays identical. Evidence: export documents are completed in-house, so spec sheets and shipping papers leave together.

Send me the colour reference and acceptance standard you use today, even if the standard is one line saying colour follows the sample. Within 48 hours you get a workable colour clause: how to write the reference, what Delta E to set, and how a dispute is judged.

Remembering every colour reference the way a hotel remembers a guest

A hotel remembers whether you want a firm pillow, so you never explain it twice. A colour reference works the same way: fix it once, file it properly, and every later batch follows the file.

What a hotel doesWhat we commit to
A guest preference fileOne colour file per SKU: reference, ink maker, batch and measured Delta E all retained
The room is ready before check-inA drawdown check before mass production, so trial and error does not sit inside your lead time
Express checkout, no inspectionThe colour report ships with the goods, so acceptance happens on arrival rather than on the shelf

FAQ and service promise

Can you hold Delta E 1
Yes, depending on the colour. Pale and mid tones on spot ink with a fixed substrate can stay within 1. Full-bleed darks, metallics and fluorescents cannot hold 1 reliably, and promising 1 is a trap you set for yourself. The workable approach is grading by colour: tight on the brand colour, looser on supporting colours.
How do you match colour across different substrates
Not identically, only visually. Paper, PET and foil differ in base whiteness and gloss, and 1 to 2 Delta E between them at the same ink weight is normal. The practical answer is a separate signed sample per substrate, with a note in the spec that 3 Delta E is allowed across substrates.
Does a new ink batch need a new signed sample
Yes. Even from the same supplier, a different batch of the same reference shifts hue, and water-based inks show it most. Run a drawdown comparison on every incoming batch and re-sign anything beyond Delta E 1.5. That half day prevents a full reprint.
Who pays for a colour rejection
It depends on the contract. With a Delta E limit and a measurement condition written down, data decides. Without them it becomes one opinion against another, and the supplier usually absorbs it. An acceptance clause is not paperwork, it is cost control.
How many sampling rounds
Two normally: the first fixes hue, the second fixes ink weight and process. Full-bleed darks and spot gold often need three. After signing, keep three retained samples: customer, factory and a third party.
Why are full-bleed darks difficult
The ink film is thick and opacity requirements are high, so drying and registration errors are magnified and Delta E reacts sharply to ink weight. The fixes are additional ink-weight control points, a lower press speed, and spot colour where it makes sense. The lowest-cost fix is design: avoid large four-colour dark backgrounds from the start.
Talk to Tian Jie directly · reply same day
WeChat tianjie567 (mention “packaging” for a faster reply)
Mobile / WeChat +86 155 8981 0168 (Tian Jie)
Tel +86 532 8577 9539
Hotline (China) 400-8558-816
Email sd532@126.com
Address No.7 Xianshan Road, Chengyang District, Qingdao, China (2,000㎡ plant + 500㎡ design office)
Hours Mon–Sat 8:30–17:30 (GMT+8) · urgent orders 24/7
Step one: send a photo of the current pack plus the colour reference you want on WeChat tianjie567, and photograph the signed sample if you have one. Step two: within 48 hours you receive a workable Delta E clause, the route to hit that reference, and a sampling date. For urgent cases call 155 8981 0168.

Delta E values and measurement conditions described here are standard industry practice; the signed sample and the contract acceptance clause govern.